


This small board was designed for the LilyGO T-Display S3 radio project. It puts a Bluetooth audio module, a DAC and a 3W class-D amplifier (the MAX98357A) on one PCB. It has the same header layout as the T-Display S3, so it connects straight to the board with no extra wires. It’s made for the radio firmware, not as a universal module. Each module is soldered by hand, then tested on a T-Display S3.
The board integrates
Bluetooth audio module
Stream music wirelessly to:
- Bluetooth speakers
- Bluetooth headphones
- AirPods and similar Bluetooth devices
MAX98357A audio chip
Functions as both:
- I2S Digital-to-Analog Converter (DAC)
- 3W Class-D audio amplifier
Direct connection to the LilyGO T-Display S3
The module uses the same header layout as the LilyGO T-Display S3, allowing it to connect directly to the board without adapter wires.
This provides a clean and compact solution for building the Internet Radio.
Why it was made
This Module was designed specifically for The MicroMaker Internet Radio project to provide a clean, compact, and fully integrated audio solution.
Instead of using separate Bluetooth, DAC, and amplifier modules, everything is combined into one optimized PCB that:
- Matches the LilyGO T-Display S3 header layout
- Works directly with The MicroMaker official firmware
- Reduces wiring complexity
- Makes the DIY build cleaner and more reliable
- Provides both Bluetooth audio and direct speaker output
What makes it special?
Dual audio capability
- Stream audio wirelessly via Bluetooth to external devices
- Drive a speaker directly through the MAX98357A amplifier
Direct header connection
Connects directly to the LilyGO T-Display S3 headers.
Made for the radio firmware
The module is designed to work with the internet radio firmware.
Compact custom PCB
Optimized specifically for this Internet Radio project.
Demo Videos
Demo videos can be found on The MicroMaker YouTube channel:
